Home   »   BIM   »   BIM4Analysis – Frequently Asked Questions

BIM4Analysis – Frequently Asked Questions

Posted : June 28, 2016 by , Category: BIM

BIM FAQ
In January 2016, the IES team, alongside special guest speaker Jean Carriere of Trailloop, hosted another instalment of our popular IES Faculty BIM webinar series. The event provided an update on our BIM4Analysis strategy and interoperability development work.

Based on participant feedback from the event, we compiled the following list of FAQs which have been answered by our experts. You can also access the full FAQ document here.

Q: Is a full version of Revit necessary or just a viewer will do to perform exporting of the gbxml?
A full version of Revit would be required as it generates the gbXML from the geometry within the software. A viewer would not have this capability.

Q: Do you often come across examples that the architect is not willing to change their workflows to create the Revit file according to your workflow? Any thoughts on how to educate the architect to set up the Revit file to accommodate this process? A big part of this process is ensuring the initial Revit model is created with energy modelling in mind and my experience says changing the Revit file, if it is not done right, usually takes the modeller more time to clean up than starting from scratch…
A number of years ago this was very much the case, but the business benefits and time saving identified by a collaborative BIM process have made/should make it a no brainer for teams to collaborate to make it work. For an architect the process of building a Revit model to export a clean gbXML is much easier as it requires much less detail. We’ve included links below to some related resources that we hope are helpful.

We are in the process of creating a new basic modelling video which will be available soon on our YouTube channel.

Q: How do you prevent the analytical wall from trying to resolve against the architectural wall in Revit?
This can be performed with Revit MEP. Just head to our BIM Integration Features (IES BIM Faculty) video, fast forward to 9 minutes 30 seconds into the video and follow the steps.

Q: There was an element shown as an obstruction in the import, is this normal?
Yes, if you have set up your Revit model to allow for overhangs etc. this would be normal.

Q: I have noted that the plug-in is only available for v2015 Revit. Is a 2016 version on the way?
The Revit plug-in is automatically installed with all IESVE software installations. The 2016 version is available with our current release which you can download here. If there is ever no plugin you can always use the Revit export function from the file menu within Revit.

Q: Do you think it is best to setup customised space templates rather than use built in Revit functionality?
If you are referring to space templates within the VE, there are benefits to both processes. The trick is to identify the best process for your organisation and the way that you want to work.

Q: If you create one wall that overlays with another wall in Revit, they try to resolve against each other. How does Jean’s process deal with this?
You would need to choose one of these to be the primary room bounding element so as to avoid any conflict in the gbXML that Revit creates.

Q: Presumably all geometry modifications, such as BCO zoning, need to be done in the Revit model to maintain consistency in terms of room names and numbers?
Yes, it would make it easier from a consistency point of view as the room names are the key to synchronising data between the different models. In saying that it is not essential as you can make changes in the VE, but just be aware that you have varying room names. In addition, consideration to the number of differences that you make between the two models has to be assessed before you make any modifications.

Q: As an architect interested in transferring a clean model over to the virtual energy modelling environment, what are the basic tools that I need to be convinced the translation has occurred successfully? Is the Revit IES VE plug-in alone enough? I do not necessarily want to purchase a full version of the IES VE software but want to do my part to support a very smooth process.
You can use our free plugin and use that to load up the VE for free and check models. You can also check models within Revit before you export using its gbXML export dialogue. No need to purchase anything.

Q: Can IES update official guidance on interoperability as last guide was issued over 1 year ago.
Yes, this is in progress. We’ll be in touch as soon as the updated guidance is available.

Q: Another software provider has claimed IES do not comply with the full BIM Level 2 requirement by not forming a closed loop between energy analysis and re-working the design (i.e. architects model). Is there any justification to that claim?
No, there are processes and tools within the VE software that will help you to achieve this. IES VE software is one of few platforms that allows you to utilise data throughout the full lifecycle of an asset, not just in the design, but right through into operation, from one source.

We are also working to providing videos of this so keep checking back to our YouTube channel.

Q: Can you show us how to import properly from Revit to IES VE?
We have online videos on our YouTube channel as well as live e-training sessions we offer that take you through how to import from Revit to the VE. If you need any further assistance please contact our support team.

Q: Is BIM to BEM a good option? If yes, what is the effective way to do it?
Yes, just follow the guidance in our BIM + Building Performance Analysis White Paper to keep it simple. Contact us if you’d like us to provide a demonstration of this.

If you missed it, you can catch up on our latest BIM Faculty session and previous seminars on the IESVE You Tube channel. Further information can also be found on our BIM4Analysis page.

 



Leave a Reply


Type your comment here




Featured Video

Copyright © 2009 Integrated Environmental Solutions Limited. All rights reserved